Manufacturer
AirCom Pneumatic
Part number
DS35-D
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The pressure switch closes or opens an electrical contact when
the desired pressure is reached. When the pressure falls below
the adjusted setpoint, the contact will be reset.
Media: compressed air or non-corrosive gases
Switch_contact: SPDT switch
Overpressure: see chart for max. static pressure,
dynamic pressures are 50% lower
Contact_load:
2 A at 230 V AC
EX-ATEX_version:
ExII 2G Ex d II C T6/T5
Electrical_connector:
3-wire connection cable, length 2 m,
cross-sectional area 0.5 mm²
Hysteresis: < 25% FS, ca. 10% FS in the lower range
Life_cycle: 106 switching cycles at < 50 bar
Switching_frequency: 200 cycles/min
Vibration_resistance: 10 g at 5…200 Hz
Shock_resistance: 30 g
Mounting_position: any
Protection_class: IP 65
Temperature_range:
-20 °C to 80 °C / 23 °F to 176 °F for NBR/Buna-N and EPDM
-5 °C to 80 °C / 23 °F to 176 °F for FKM
Body: aluminium
Elastomer: NBR/Buna-N, optionally EPDM or FKM
the desired pressure is reached. When the pressure falls below
the adjusted setpoint, the contact will be reset.
Media: compressed air or non-corrosive gases
Switch_contact: SPDT switch
Overpressure: see chart for max. static pressure,
dynamic pressures are 50% lower
Contact_load:
2 A at 230 V AC
EX-ATEX_version:
ExII 2G Ex d II C T6/T5
Electrical_connector:
3-wire connection cable, length 2 m,
cross-sectional area 0.5 mm²
Hysteresis: < 25% FS, ca. 10% FS in the lower range
Life_cycle: 106 switching cycles at < 50 bar
Switching_frequency: 200 cycles/min
Vibration_resistance: 10 g at 5…200 Hz
Shock_resistance: 30 g
Mounting_position: any
Protection_class: IP 65
Temperature_range:
-20 °C to 80 °C / 23 °F to 176 °F for NBR/Buna-N and EPDM
-5 °C to 80 °C / 23 °F to 176 °F for FKM
Body: aluminium
Elastomer: NBR/Buna-N, optionally EPDM or FKM
