Manufacturer
AirCom Pneumatic
Part number
QP32-10NR
Country
Germany
Weight (g)
1000
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The flow control valve functions as a pinch valve in a new
design of housing with full flow cross-section. Since the
straight valve passage has neither constrictions nor back-points,
there is no danger of clogging or blockage. Frictional loss is
at a minimum.
Media:
Compressed air, non-corrosive gases, liquids or other paste-like
or powdery media. Solids are enclosed by the flexible sleeve at
shut-off.
Sleeve:
Highly flexible with double-woven reinforcement in eight different
grades. Sleeve simple to change.
Pressures:
- Operating pressure = max. 4.0 bar
- Pilot pressure = max. 6.5 bar
- Differential pressure = max. 2.5 bar
- Closing pressure = P1 + 2.5 bar to DN32, P1 + 2 bar from DN40 on
Vacuum:
If vacuum is greater than -100 mbar, vacuum compensation should be
provided on the control side.
Accuracy:
In the flow range of 0 to 70% the accuracy of the linearity of pilot
pressure to flow is approx. 10%.
Mounting_position: any
Temperature_range: 0 °C to max. 100 °C / 32 °F to max. 212 °F,
subject to sleeve material
Body: POM at QP or aluminium die-cast at QS
Sleeve: depending on selected version
design of housing with full flow cross-section. Since the
straight valve passage has neither constrictions nor back-points,
there is no danger of clogging or blockage. Frictional loss is
at a minimum.
Media:
Compressed air, non-corrosive gases, liquids or other paste-like
or powdery media. Solids are enclosed by the flexible sleeve at
shut-off.
Sleeve:
Highly flexible with double-woven reinforcement in eight different
grades. Sleeve simple to change.
Pressures:
- Operating pressure = max. 4.0 bar
- Pilot pressure = max. 6.5 bar
- Differential pressure = max. 2.5 bar
- Closing pressure = P1 + 2.5 bar to DN32, P1 + 2 bar from DN40 on
Vacuum:
If vacuum is greater than -100 mbar, vacuum compensation should be
provided on the control side.
Accuracy:
In the flow range of 0 to 70% the accuracy of the linearity of pilot
pressure to flow is approx. 10%.
Mounting_position: any
Temperature_range: 0 °C to max. 100 °C / 32 °F to max. 212 °F,
subject to sleeve material
Body: POM at QP or aluminium die-cast at QS
Sleeve: depending on selected version
