Manufacturer
AirCom Pneumatic
Part number
QE06-02NR
Country
Germany
Weight (g)
160
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The flow control valve functions as a pinch valve in a new design
of housing with full flow cross-section. Since the straight valve
passage has neither constrictions nor back-points, there is no danger
of clogging or blockage. Frictional loss is at a minimum.
Media:
compressed air, gases, liquids or other paste-like or powdery media
Solids are enclosed by the flexible sleeve at shut-off.
Sleeve: Highly flexible with double woven reinforcement in eight
different grades. Sleeve simple to change.
Pressures:
Operating pressure = max. 4.0 bar
Pilot pressure = max. 6.5
Differential pressure = max. 2.5 bar
Closing pressure = P1 + 2.5 bar to DN 32, P1 + 2 bar from DN 40 on
Vacuum: If vacuum is greater than -100 mbar, vacuum compensation
should be provided on the control side.
Accuracy: In the flow range of 0 to 70% the linearity of
pilot pressure to flow is about 10% accurate.
Mounting_position: any, at horizontal mounting pilot port
preferably at the top
Temperature_range: 0 °C to max. 100 °C / 32 °F to max. 212 °F,
subject to sleeve material
Body: stainless steel 316L, material no. 1.4435
Sleeve: depending on selected version
of housing with full flow cross-section. Since the straight valve
passage has neither constrictions nor back-points, there is no danger
of clogging or blockage. Frictional loss is at a minimum.
Media:
compressed air, gases, liquids or other paste-like or powdery media
Solids are enclosed by the flexible sleeve at shut-off.
Sleeve: Highly flexible with double woven reinforcement in eight
different grades. Sleeve simple to change.
Pressures:
Operating pressure = max. 4.0 bar
Pilot pressure = max. 6.5
Differential pressure = max. 2.5 bar
Closing pressure = P1 + 2.5 bar to DN 32, P1 + 2 bar from DN 40 on
Vacuum: If vacuum is greater than -100 mbar, vacuum compensation
should be provided on the control side.
Accuracy: In the flow range of 0 to 70% the linearity of
pilot pressure to flow is about 10% accurate.
Mounting_position: any, at horizontal mounting pilot port
preferably at the top
Temperature_range: 0 °C to max. 100 °C / 32 °F to max. 212 °F,
subject to sleeve material
Body: stainless steel 316L, material no. 1.4435
Sleeve: depending on selected version
