Manufacturer
AirCom Pneumatic
Part number
D3100-10DT_01
Country
Germany
Weight (g)
18000
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The diaphragm back pressure regulator protects compressed air devices
from excessive pressure. If the pressure setpoint is exceeded,
overpressure is vented into the atmosphere until the setpoint is
reached again. It is recommended to choose a pressure range as low
as possible.
Media: compressed air, gases
System_pressure: max. 6 bar
Adjustment:
by adjusting screw for D3100-04 to - 1A, with locknut
by T-handle for D3100-12 and -16, with locknut
Gauge_port: G1/4 on both sides of the body, screw plugs supplied
Mounting_position: any
Temperature_range:
0 °C to 80 °C / 32 °F to 176 °F, FKM or EPDM
0 °C to 130 °C / 32 °F to 266 °F, high temperature version
for appropriately conditioned compressed air down to -20 °C / -4 °F
or low temperature version down to -40 °C / -40 °F
Body: stainless steel 316L, material no. 1.4404
Diaphragm: NBR/Buna-N with PTFE coating
O-rings: FKM, optionally EPDM
Inner valve: stainless steel 316L, material no. 1.4404
from excessive pressure. If the pressure setpoint is exceeded,
overpressure is vented into the atmosphere until the setpoint is
reached again. It is recommended to choose a pressure range as low
as possible.
Media: compressed air, gases
System_pressure: max. 6 bar
Adjustment:
by adjusting screw for D3100-04 to - 1A, with locknut
by T-handle for D3100-12 and -16, with locknut
Gauge_port: G1/4 on both sides of the body, screw plugs supplied
Mounting_position: any
Temperature_range:
0 °C to 80 °C / 32 °F to 176 °F, FKM or EPDM
0 °C to 130 °C / 32 °F to 266 °F, high temperature version
for appropriately conditioned compressed air down to -20 °C / -4 °F
or low temperature version down to -40 °C / -40 °F
Body: stainless steel 316L, material no. 1.4404
Diaphragm: NBR/Buna-N with PTFE coating
O-rings: FKM, optionally EPDM
Inner valve: stainless steel 316L, material no. 1.4404
