Manufacturer
AirCom Pneumatic
Part number
RWI-03I
Country
Germany
Weight (g)
1600
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
Regulator independent of inlet pressure, made of gunmetal,
with strainer of stainless steel. Regulators up to 10 bar
outlet pressure equipped with diaphragm, all others are
piston-operated.
Drinking_water:
particulary all regulators,
RWI-..C with outlet range 1.5 ...6 bar
Media:
preferably water or drinking water, but also compressed air,
neutral liquids and non-corrosive gases. Especially suitable
for air are regulators RWI-..D. It has to be considered that
these regulators are non-relieving.
Pressure_difference: 1 bar, between inlet and outlet pressure
Mounting_position: any, preferably vertical
Reduction_ratio:
between supply and outlet pressure should not be greater than:
20:1 for RWI-..A,
10:1 for RWI-..D,
6:1 for RWI-..G/H,
3:1 for RWI-..I
Gauge_port: G1/4 on both sides of the body for outlet pressure,
ports are closed with screw plugs.
ATEX: according to ATEX2014/34/EU, EN1127, EN13463 for zone 1, 2, 21 and 22
PED: according to EU directives DGRL/PED for liquids and gases of group 2
Screw_standard: according to DIN ISO 228
Temperature_range:
0 °C to 80 °C / 32 °F to 176 °F
Material: see catalogue page
with strainer of stainless steel. Regulators up to 10 bar
outlet pressure equipped with diaphragm, all others are
piston-operated.
Drinking_water:
particulary all regulators,
RWI-..C with outlet range 1.5 ...6 bar
Media:
preferably water or drinking water, but also compressed air,
neutral liquids and non-corrosive gases. Especially suitable
for air are regulators RWI-..D. It has to be considered that
these regulators are non-relieving.
Pressure_difference: 1 bar, between inlet and outlet pressure
Mounting_position: any, preferably vertical
Reduction_ratio:
between supply and outlet pressure should not be greater than:
20:1 for RWI-..A,
10:1 for RWI-..D,
6:1 for RWI-..G/H,
3:1 for RWI-..I
Gauge_port: G1/4 on both sides of the body for outlet pressure,
ports are closed with screw plugs.
ATEX: according to ATEX2014/34/EU, EN1127, EN13463 for zone 1, 2, 21 and 22
PED: according to EU directives DGRL/PED for liquids and gases of group 2
Screw_standard: according to DIN ISO 228
Temperature_range:
0 °C to 80 °C / 32 °F to 176 °F
Material: see catalogue page
