Manufacturer
AirCom Pneumatic
Part number
PVR37-45
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
Mass flow meter directly measuring flow according to constant temperature anemometer principle. The measured setpoint is compared with the nominal value. The valve will be readjusted accordingly.
Mechanical_Construction:
PVR31/32/34/36: mass flow meter and meter in the same housing
PVR 37: mass flow meter and meter together at the measuring bob
PVR38: mass flow meter and meter as single components are bolted together
Media: compressed air, air as well as virtually all gases and gas mixtures
Compensation: Neither temperature nor pressure have to be compensated. There are no moving parts within the flow meter, therefore it is virtually wear-free.
Pressure_drop: Low pressure drop because solely two stainless steel probes protrude inside the smooth, round measurement cell. The use of screw connections with a nominal size as big as possible is suggested.
Temperature_range: 0 °C to 50 °C / 32 °F to 122 °F
Operating_pressure: max. 10 bar
Differential_pressure: device dependent
Body: aluminium, optionally SST 316L
Elastomer: Viton®, optionally EPDM or Kalrez®
Sensor: stainless steel 316L
strainer: stainless steel
Mechanical_Construction:
PVR31/32/34/36: mass flow meter and meter in the same housing
PVR 37: mass flow meter and meter together at the measuring bob
PVR38: mass flow meter and meter as single components are bolted together
Media: compressed air, air as well as virtually all gases and gas mixtures
Compensation: Neither temperature nor pressure have to be compensated. There are no moving parts within the flow meter, therefore it is virtually wear-free.
Pressure_drop: Low pressure drop because solely two stainless steel probes protrude inside the smooth, round measurement cell. The use of screw connections with a nominal size as big as possible is suggested.
Temperature_range: 0 °C to 50 °C / 32 °F to 122 °F
Operating_pressure: max. 10 bar
Differential_pressure: device dependent
Body: aluminium, optionally SST 316L
Elastomer: Viton®, optionally EPDM or Kalrez®
Sensor: stainless steel 316L
strainer: stainless steel
