Manufacturer
AirCom Pneumatic
Part number
DSP-DB2
Country
Germany
Weight (g)
100
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
Adjustable pressure switch for monitoring pressure, vacuum and
differential pressure. From the 6 bar device on two turns of
the adjusting knob are necessary for the whole adjustment range,
so the scale on the knob is inappropriate.
Media: compressed air, non-corrosive gases or liquids
Overpressure: see chart
Switch_contact: SPDT switch with silver contact,
optionally gold contact
Contact_load: 2 A at 24 V DC, 6 A at 250 V AC
Electrical_connector: AMP spade terminal, 6.3 x 8 mm,
according to DIN 46244
Hysteresis: see chart
Life_cycle: 1E7 switching cycles
Vibration_resistance: 20 g
Certifications: VDE, TÜV design test, optionally Atex
Switching_time: 30 ms
Mounting_position: any, but indication needed for
switch point < 100 mbar
Protection_class: IP 65 w/ coupling socket
Temperature_range:
-20 °C to 85 °C / -4 °F to 185 °F for NBR/Buna-N, EPDM and polyamide,
up to 130 °C / 266 °F for FKM
Body: Zytel, a high-quality polyamide
Elastomer: NBR/Buna-N, optionally EPDM, FKM or special FKM
(saturated steam-resistant)
Pressure_connection: brass, at DSP-W polyamide,
optionally stainless steel or PVDF
differential pressure. From the 6 bar device on two turns of
the adjusting knob are necessary for the whole adjustment range,
so the scale on the knob is inappropriate.
Media: compressed air, non-corrosive gases or liquids
Overpressure: see chart
Switch_contact: SPDT switch with silver contact,
optionally gold contact
Contact_load: 2 A at 24 V DC, 6 A at 250 V AC
Electrical_connector: AMP spade terminal, 6.3 x 8 mm,
according to DIN 46244
Hysteresis: see chart
Life_cycle: 1E7 switching cycles
Vibration_resistance: 20 g
Certifications: VDE, TÜV design test, optionally Atex
Switching_time: 30 ms
Mounting_position: any, but indication needed for
switch point < 100 mbar
Protection_class: IP 65 w/ coupling socket
Temperature_range:
-20 °C to 85 °C / -4 °F to 185 °F for NBR/Buna-N, EPDM and polyamide,
up to 130 °C / 266 °F for FKM
Body: Zytel, a high-quality polyamide
Elastomer: NBR/Buna-N, optionally EPDM, FKM or special FKM
(saturated steam-resistant)
Pressure_connection: brass, at DSP-W polyamide,
optionally stainless steel or PVDF
