Manufacturer
AirCom Pneumatic
Part number
MHA-08
Country
Germany
Weight (g)
250
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
A piezo-resistive pressure sensor converts the input pressure
into a digital electrical signal which is displayed on the LCD.
On-off switch is located at the side of the plastic housing.
Media: compressed air or non-corrosive gases
Overpressure: see chart
Pneumatic_connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure to be connected
at P+ plug nipple up to 1 bar, sleeve with union nut from 2 bar on,
each for hose internal diameter of Ø 4 mm
Voltage_supply: 9 V battery, 2.5 mA, type 6F22 or PP3 or similar
Display:
31/2-digit LCD display, max. ± 1999, 12 mm tall, black numbers,
low battery display at low voltage, red LED lights up at overpressure,
then measurement is faulty
Output_signal: optionally 0...1 V
Impedance: > 2 kΩ terminal for 2.5 mm 2-pin jack plug
Zero_point: All devices have a potentiometer for rough adjustment of
zero point at the side of the housing.
Linearity: see chart, optionally 0.2% FS
Hysteresis: < 0.1% FS
Long-term_stability:
< 0.1% FS per year at > 20 mbar,
< 2% FS per year at < 20 mbar
Temperature_sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Temperature_range: 0 °C to 50 °C / 32 °F to 122 °F
Resolution: 0.05% FS
Housing: plastic
Protection_class: IP 54
into a digital electrical signal which is displayed on the LCD.
On-off switch is located at the side of the plastic housing.
Media: compressed air or non-corrosive gases
Overpressure: see chart
Pneumatic_connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure to be connected
at P+ plug nipple up to 1 bar, sleeve with union nut from 2 bar on,
each for hose internal diameter of Ø 4 mm
Voltage_supply: 9 V battery, 2.5 mA, type 6F22 or PP3 or similar
Display:
31/2-digit LCD display, max. ± 1999, 12 mm tall, black numbers,
low battery display at low voltage, red LED lights up at overpressure,
then measurement is faulty
Output_signal: optionally 0...1 V
Impedance: > 2 kΩ terminal for 2.5 mm 2-pin jack plug
Zero_point: All devices have a potentiometer for rough adjustment of
zero point at the side of the housing.
Linearity: see chart, optionally 0.2% FS
Hysteresis: < 0.1% FS
Long-term_stability:
< 0.1% FS per year at > 20 mbar,
< 2% FS per year at < 20 mbar
Temperature_sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Temperature_range: 0 °C to 50 °C / 32 °F to 122 °F
Resolution: 0.05% FS
Housing: plastic
Protection_class: IP 54
