Manufacturer
AirCom Pneumatic
Part number
DS16-B
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The pressure switch closes or opens an electrical contact when
the desired pressure is reached. If it falls below, the contact
will be reset.
Media: compressed air, non-corrosive gases or liquids
Overpressure: see chart for max. static pressure, dynamic pressures are 50% lower
Switch_contact:
NO contact, optionally NC contact
Contact_load:
2 A at 42 V DC,
Electrical_connector:
screw terminal,
spade terminal 6.3 x 0.8 mm, optionally also for DS15/16
Hysteresis:
5...20%
Life_cycle: 106 switching cycles at < 50 bar
Switching_frequency: max. 200 cycles/min
Vibration_resistance: 10 g at 5...200 Hz
Shock_resistance: 30 g
Certifications: CSA-certified and UL-listed
Mounting_position: any
Protection_class: IP 00, with coupling socket IP 65
Temperature_range:
-30 °C to 100 °C / -22 °F to 212 °F for NBR/Buna-N,
-30 °C to 120 °C / -22 °F to 248 °F for EPDM,
-5 °C to 120 °C / 23 °F to 248 °F for FKM
Body: steel
Elastomer: NBR/Buna-N, optionally EPDM or FKM
the desired pressure is reached. If it falls below, the contact
will be reset.
Media: compressed air, non-corrosive gases or liquids
Overpressure: see chart for max. static pressure, dynamic pressures are 50% lower
Switch_contact:
NO contact, optionally NC contact
Contact_load:
2 A at 42 V DC,
Electrical_connector:
screw terminal,
spade terminal 6.3 x 0.8 mm, optionally also for DS15/16
Hysteresis:
5...20%
Life_cycle: 106 switching cycles at < 50 bar
Switching_frequency: max. 200 cycles/min
Vibration_resistance: 10 g at 5...200 Hz
Shock_resistance: 30 g
Certifications: CSA-certified and UL-listed
Mounting_position: any
Protection_class: IP 00, with coupling socket IP 65
Temperature_range:
-30 °C to 100 °C / -22 °F to 212 °F for NBR/Buna-N,
-30 °C to 120 °C / -22 °F to 248 °F for EPDM,
-5 °C to 120 °C / 23 °F to 248 °F for FKM
Body: steel
Elastomer: NBR/Buna-N, optionally EPDM or FKM
